Betourea H

Betourea H represents state-of-the-art liquid-applied coating technology, engineered to cure into a seamless, highly elastomeric, and durable waterproofing shield. It is highly resistant to standing water, chemical attack, UV degradation, and crack propagation, making it the premier choice for complex roof areas, wet rooms, and trafficable podium decks.

Product Overview

Betourea H belongs to the Polyurea Coating Systems family. It is intended for traffic decks, roofs, planters and general industrial protection. Final product selection must account for substrate condition, exposure, application method and compatibility with adjoining layers. Betourea H represents state-of-the-art liquid-applied coating technology, engineered to cure into a seamless, highly elastomeric, and durable waterproofing shield. It is highly resistant to standing water, chemical attack, UV degradation, and crack propagation, making it the premier choice for complex roof areas, wet rooms, and trafficable podium decks.

Best-fit Applications

• Traffic decks
• Roofs
• Planters
• General industrial protection

Technical Benefits

• Fast application and cure
• Seamless detail coverage
• Versatile protected or topcoated build-ups

Technical & Performance Specifications

Physical Property	Declared Performance Value	Test Standard
Tensile Strength	> 6.5 N/mm²	ASTM D412
Elongation at Break	> 500% (High elasticity)	ASTM D412
Crack Bridging Ability	Up to 2.0 mm	ASTM C836
Shore A Hardness	70 - 75	ASTM D2240
Solid Content	> 90% (Liquid polyurethane)	ASTM D1644
UV Resistance	Excellent resistance, no yellowing	ASTM G154

Technical Datasheet Locked

To unlock the full performance values, chemical analysis, and test standards, please request the technical datasheet.

Unlock Specifications

Application Guidelines & Installation Method

Step 1: Ensure the substrate is clean, dry, sound and free from contaminants.

Step 2: Apply the approved primer in accordance with the TDS.

Step 3: Spray polyurea uniformly using approved equipment at the specified thickness.

Step 4: Reinforce and treat joints, corners, penetrations and terminations.

Step 5: Inspect for uniform thickness, pinholes and defects, then protect the completed coating from damage until fully cured.

Standard Compliance

Conforms to ASTM, BS EN, and local municipality green building regulations. Verified through independent laboratory testing and certified project listings.