Epoxy Anti-Corrosive Primer

Epoxy Anti-Corrosive Primer is an advanced liquid-applied formulation designed to seal porous concrete, lock down dust, and promote exceptional adhesion for subsequent membranes and coatings. Its low viscosity allows deep substrate penetration, creating a highly stable interface layer resistant to moisture vapor transmission and alkalinity.

Product Overview

Epoxy Anti-Corrosive Primer belongs to the Protective & Decorative Coatings family. It is intended for steel structures, pipelines, industrial equipment and marine infrastructure. Final product selection must account for substrate condition, exposure, application method and compatibility with adjoining layers. Epoxy Anti-Corrosive Primer is an advanced liquid-applied formulation designed to seal porous concrete, lock down dust, and promote exceptional adhesion for subsequent membranes and coatings. Its low viscosity allows deep substrate penetration, creating a highly stable interface layer resistant to moisture vapor transmission and alkalinity.

Best-fit Applications

• Steel structures
• Pipelines
• Industrial equipment
• Marine infrastructure

Technical Benefits

• Promotes system adhesion
• Controls under-film corrosion
• Provides a compatible base for protective coats

Technical & Performance Specifications

Physical Property	Declared Performance Value	Test Standard
Specific Gravity	0.98 - 1.02	ASTM D1475
Drying Time (Tack-Free)	2 to 4 hours (at 35°C)	ASTM D1640
Full Cure Time	24 hours	ASTM D1640
Adhesion to Concrete	> 1.5 N/mm²	ASTM D4541
Solids Content	Approx. 40% - 60%	ASTM D1644
VOC Level	Eco-friendly, ultra-low VOC	EPA Method 24

Technical Datasheet Locked

To unlock the full performance values, chemical analysis, and test standards, please request the technical datasheet.

Unlock Specifications

Application Guidelines & Installation Method

Step 1: Ensure the substrate is clean, dry, sound and free from contaminants.

Step 2: Apply the recommended Geobit primer and allow it to dry.

Step 3: Apply the material uniformly to the TDS-specified thickness, coverage and number of coats.

Step 4: Treat joints, corners, penetrations, drains, upstands and terminations.

Step 5: Protect the completed coating from traffic, weather, damage and subsequent works until fully cured.

Standard Compliance

Conforms to ASTM, BS EN, and local municipality green building regulations. Verified through independent laboratory testing and certified project listings.