Betofloor SL 50 CM

BETOFLOOR SL 50 CM is a specialized, cement-matrix self-leveling compound modified with high-durability polymer additives. It is engineered for industrial and commercial floors requiring a fast-track, durable, and crack-resistant leveling layer, especially in areas subject to moderate mechanical stress or moisture.

Product Overview

Betofloor SL 50 CM & Underlayment belongs to the Flooring Systems & Tile Adhesive family. It is intended for factories, commercial interiors, floor renovation and substrate leveling. Final product selection must account for substrate condition, exposure, application method and compatibility with adjoining layers. BETOFLOOR SL 50 CM is a specialized, cement-matrix self-leveling compound modified with high-durability polymer additives. It is engineered for industrial and commercial floors requiring a fast-track, durable, and crack-resistant leveling layer, especially in areas subject to moderate mechanical stress or moisture.

Best-fit Applications

• Factories
• Commercial interiors
• Floor renovation
• Substrate leveling

Technical Benefits

• Smooth level finish
• Efficient placement over large areas
• Supports subsequent floor finishes where approved

Technical & Performance Specifications

Physical Property	Declared Performance Value	Test Standard
Compressive Strength (28 days)	> 35 N/mm²	EN 13892-2
Flexural Strength (28 days)	> 7.5 N/mm²	EN 13892-2
Flowability (Self-Leveling)	240 - 270 mm	EN 12706
Application Thickness	5 mm to 50 mm	Manufacturer Spec
Foot Traffic Time	4 to 6 hours	At 30°C
Adhesion to Concrete	> 1.8 N/mm²	EN 13892-8

Technical Datasheet Locked

To unlock the full performance values, chemical analysis, and test standards, please request the technical datasheet.

Unlock Specifications

Application Guidelines & Installation Method

Step 1: For epoxy flooring, prepare the substrate by grinding or cleaning, apply the recommended primer, apply the coating to the specified thickness and broadcast aggregate where required; allow it to cure before traffic.

Step 2: For self-leveling flooring, ensure a clean, sound, dry substrate, apply primer, mix and pour uniformly, spread with a gauge rake, remove air with a spike roller and cure to TDS.

Step 3: For cementitious tile adhesive, use a clean, sound, suitably dampened substrate, mix to the specified water ratio, apply with a notched trowel, fix tiles within open time and allow to cure.

Standard Compliance

Conforms to ASTM, BS EN, and local municipality green building regulations. Verified through independent laboratory testing and certified project listings.